MIG/MAG robot pulse welding machine, multiprocess, including all characteristics and welding processes, modular
-
- MIG/MAG robot pulse welding machine, multiprocess, including all characteristics and welding processes, modular
- Small, lightweight and compact, can be integrated into any automation solution – with high output
- Available without¹ or with² front control
- ¹ Set up on external operating panel or notebook with PC300.NET software or
- ² set up on Expert 2.0 XQ control with intuitive user guidance via LCD and plain text display for all welding parameters and functions
- No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works
- With innovative EWM Synergic characteristics: rootArc® XQ / rootArc® puls XQ, forceArc® XQ / forceArc® puls XQ, pulse / superPuls and Positionweld for aluminium
- Synergic characteristics for MIG/MAG standard or pulsed welding for steel/CrNi/aluminium
- Ready to connect an M Drive 4 ROB 5 LI/RE wire feeder
- 19-pole interface for automated welding for simple applications (optional)
- Optional RINT X12 interface, BUSINT 4.0 interface
- Parameters adjustable via interfaces: 510 JOBs each with 15 programs in program mode; wire feed speed, arc length correction and arc dynamics in control signal operation
- Optimised for automated and mechanised applications in the manufacture of machinery, cars, vehicles, containers, equipment and ships
- LED information field: Display for operating status during and after initialization
- Gas or water cooled with cooling unit
- Cooling unit with centrifugal pump, flow and temperature monitoring, can also be used externally next to the power source
- Sensor voltage ex works 18 V
- Earth fault monitoring (PE protection)
- IP23 spray water protected
- Optional network connectivity with ewm Xnet quality management software via LAN or WiFi gateway
- PC interface for PC300 XQ software
- Can be individually configured to meet your requirements
-
Version Phoenix XQ R 355 puls 5m BUS Setting range for welding current 5 A - 350 A Duty cycle 40 °C 350 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 480 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 18.8 kVA Efficiency 89 % Power consumption Pi 32 W Protection classification IP23 Test mark EMC class A Dimensions (L x B x H) 625 mm x 298 mm x 580 mm 24.6 inch x 11.7 inch x 22.8 inch Weight 45.8 kg / 101 lbs Standards IEC 60974-1 and -10 CL.A -
Cool XQ R 55 U40Cooling unit for robot welding machines, Multivolt-compatible
Cooling unit for robot welding machines
blueCool -10“blueCool” coolant to -10 °C (-14 °F), 5 l
Coolant for water-cooled welding machines and cooling units
ON PALETTE XX5Transport pallet for power source and add-on module
Transport pallet for power source and an additional module
Trolly 53Transport cart (4 wheels) for moving a power source and a cooling unit
Transport cart (4 wheels) for moving a power source and a cooling unit
RA10 19POL 1x 10MConnection cable, 19-pole, one-sided wire end ferrules
one-sided with wire end ferrules
OptimatorPressure regulator with flow meter
high precision pressure regulator with float type meter for flow measurement
Splitter 2x 7POLDistributor box to add to the available 7-pole interfaces on the welding machine
Distributor box to add to the available 7-pole interfaces on the welding machine
Configuration files can be sent on request.
